manualshive.com logo in svg

LevelOne GEL-2670, User Manual, Page: 245 / 320

Share
Download
LevelOne GEL-2670 User Manual Download Page 245

C

HAPTER

 5

  |  Monitoring the Switch

Displaying Information About Security Settings

–  245  –

Figure 111:  DHCP Snooping Statistics   

D

ISPLAYING

 DHCP

R

ELAY

 S

TATISTICS

Use the DHCP Relay Statistics page to display statistics for the DHCP relay 

service supported by this switch and DHCP relay clients.

P

ATH

 

Monitor, Security, Network, DHCP, Relay Statistics

P

ARAMETERS

These parameters are displayed:

Server Statistics

◆

Transmit to Server

 – The number of packets relayed from the client 

to the server. 

◆

Transmit Error

 – The number of packets containing errors that were 

sent to clients.

◆

Receive from Server

 – The number of packets received from the 

server.

◆

Receive Missing Agent Option

 – The number of packets that were 

received without agent information options. 

◆

Receive Missing Circuit ID

 – The number of packets that were 

received with the Circuit ID option missing. 

◆

Receive Missing Remote ID

 – The number of packets that were 

received with the Remote ID option missing. 

Summary of Contents for GEL-2670

































































































































































































































































































































Reviews:

No comments