LevelOne GEL-2670, User Manual, Page: 258 / 320

C
HAPTER
5
| Monitoring the Switch
Displaying Information on LACP
– 258 –
◆
LACP – Shows LACP status:
■
Yes – LACP is enabled and the port link is up.
■
No – LACP is not enabled or the port link is down.
■
Backup – The port could not join the aggregation group but will
join if other port leaves. Meanwhile it's LACP status is disabled.
◆
Key – Current operational value of the key for the aggregation port.
Note that only ports with the same key can aggregate together.
◆
Aggr ID – The Aggregation ID assigned to this LAG.
◆
Partner System ID – LAG partner's system ID assigned by the LACP
protocol (i.e., its MAC address).
◆
Partner Port – The partner port connected to this local port.
W
EB
I
NTERFACE
To display LACP status for local ports this switch, click Monitor, LACP, Port
Status.
Figure 122: LACP Port Status
D
ISPLAYING
LACP
P
ORT
S
TATISTICS
Use the LACP Port Statistics page to display statistics on LACP control
packets crossing on each port.
P
ATH
Monitor, LACP, Port Statistics
P
ARAMETERS
These parameters are displayed:
◆
Port – Port Identifier.
◆
LACP Transmitted – The number of LACP frames sent from each port.
◆
LACP Received – The number of LACP frames received at each port.
◆
Discarded – The number of unknown or illegal LACP frames that have
been discarded at each port.