LevelOne GEL-2670, User Manual, Page: 166 / 320

C
HAPTER
4
| Configuring the Switch
Link Layer Discovery Protocol
– 166 –
5.
Specify the information to include in the TLV field of advertised
messages.
6.
Click Save.
Figure 62: LLDP Configuration
C
ONFIGURING
LLDP-
MED TLV
S
Use the LLDP-MED Configuration page to set the device information which
is advertised for end-point devices.
LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery) is an
extension of LLDP intended for managing endpoint devices such as Voice
over IP phones and network switches. The LLDP-MED TLVs advertise
information such as network policy, power, inventory, and device location
details. Both LLDP and LLDP-MED information can be used by SNMP
applications to simplify troubleshooting, enhance network management,
and maintain an accurate network topology.
P
ATH
Advanced Configuration, LLDP-MED
P
ARAMETERS
These parameters are displayed:
◆ Fast Start Repeat Count – Rapid startup and Emergency Call Service
Location Identification Discovery of endpoints is a critically important
aspect of VoIP systems in general.In addition, it is best to advertise
only those pieces of information which are specifically relevant to