LevelOne GEL-2670, User Manual, Page: 266 / 320

C
HAPTER
5
| Monitoring the Switch
Displaying MVR Information
– 266 –
◆
V3 Reports Received – The number of IGMP V3 reports received.
◆
V2 Leaves Received – The number of IGMP V2 leaves received.
Multicast Groups
◆
VLAN ID – Identifier of the VLAN that serves as the channel for
streaming multicast services using MVR.
◆
Groups – The present multicast groups. A maximum of 128 groups are
allowed in the multicast VLAN.
◆
Port Members – The ports that are members of the entry.
W
EB
I
NTERFACE
To display information for MVR statistics and multicast groups, click
Monitor, MVR, Group Information.
Figure 130: MVR Group Information
D
ISPLAYING
MVR
SFM I
NFORMATION
Use the MVR SFM Information page to display MVR Source-Filtered
Multicast information including group, filtering mode (include or exclude),
source address, and type (allow or deny).
P
ATH
Monitor, MVR, MVR SFM Information
P
ARAMETERS
These parameters are displayed:
◆
VLAN ID – VLAN identifier.
◆
Group – The IP address of a multicast group detected on this interface.
◆
Port – Port identifier.
◆
Mode – The filtering mode maintained per VLAN ID, port number, and
Group Address. It can be either Include or Exclude.
◆
Source Address – IP Address of the source. The maximum number of
IP source addresses available for filtering is 128. When there is no
source filtering address, “None” is shown in this field.
◆
Type – Indicates the Type, either Allow or Deny.