LevelOne GEL-2670, User Manual, Page: 111 / 320

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 111 –
VLAN Parameters
◆
802.1Q Tagged - Specifies whether or not frames should be 802.1Q
tagged. (Options: Any, Disabled, Enabled; Default: Any)
◆
VLAN ID Filter - Specifies the VLAN to filter for this rule.
(Options: Any, Specific (1-4095); Default: Any)
◆
Tag Priority - Specifies the User Priority value found in the VLAN tag
(3 bits as defined by IEEE 802.1p) to match for this rule. (Options: Any,
Specific (0-7); Default: Any)
W
EB
I
NTERFACE
To configure an Access Control List for a port or a policy:
1.
Click Advanced Configuration, Security, Network, ACL, Access Control
List.
2.
Click the button to add a new ACL, or use the other ACL
modification buttons to specify the editing action (i.e., edit, delete, or
moving the relative position of entry in the list).
3.
When editing an entry on the ACE Configuration page, note that the
items displayed depend on various selections, such as Frame Type and
IP Protocol Type. Specify the relevant criteria to be matched for this
rule, and set the actions to take when a rule is matched (such as Rate
Limiter, Port Copy, Logging, and Shutdown).
4.
Click Save.