LevelOne GEL-2670, User Manual, Page: 78 / 320

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 78 –
To send inform messages to an SNMPv3 user on a remote device, you
must first specify the engine identifier for the SNMP agent on the
remote device where the user resides. The remote engine ID is used to
compute the security digest for authenticating and encrypting packets
sent to a user on the remote host.
SNMP passwords are localized using the engine ID of the authoritative
agent. For informs, the authoritative SNMP agent is the remote agent.
You therefore need to configure the remote agent's SNMP engine ID
before you can send proxy requests or informs to it. (See "Configuring
SNMP System and Trap Settings" on page 72 .)
◆
User Name - The name of user connecting to the SNMP agent.
(Range: 1-32 characters, ASCII characters 33-126 only)
◆
Security Level - The security level assigned to the user:
■
NoAuth, NoPriv - There is no authentication or encryption used in
SNMP communications. (This is the default for SNMPv3.)
■
Auth, NoPriv - SNMP communications use authentication, but the
data is not encrypted.
■
Auth, Priv - SNMP communications use both authentication and
encryption.
◆
Authentication Protocol - The method used for user authentication.
(Options: None, MD5, SHA; Default: MD5)
◆
Authentication Password - A plain text string identifying the
authentication pass phrase. (Range: 1-32 characters for MD5, 8-40
characters for SHA)
◆
Privacy Protocol - The encryption algorithm use for data privacy; only
56-bit DES is currently available. (Options: None, DES; Default: DES)
◆
Privacy Password - A string identifying the privacy pass phrase.
(Range: 8-40 characters, ASCII characters 33-126 only)
W
EB
I
NTERFACE
To configure SNMPv3 users:
1.
Click Advanced Configuration, Security, Switch, SNMP, Users.
2.
Click “Add new user” to configure a user name.
3.
Enter a remote Engine ID of up to 64 hexadecimal characters
4.
Define the user name, security level, authentication and privacy
settings.
5.
Click Save.