LevelOne GEL-2670, User Manual, Page: 282 / 320

C
HAPTER
5
| Monitoring the Switch
Displaying Information About VLANs
– 282 –
Figure 143: Showing VLAN Members
VLAN P
ORT
S
TATUS
Use the VLAN Port Status page to show the VLAN attributes of port
members for all VLANs configured by a selected software module, including
PVID, VLAN aware, ingress filtering, frame type, egress filtering, and UVID.
Refer to the preceding section for a description of the software modules
that use VLAN management services.
P
ATH
Monitor, VLANs, VLAN Port
P
ARAMETERS
These parameters are displayed:
◆
VLAN User – A software module that uses VLAN management services
to configure VLAN membership and VLAN port settings such as the
PVID or untagged VLAN ID. Refer to the preceding section for a
description of the software modules that use VLAN management
services.
◆
Port – Port Identifier.
◆
PVID – The native VLAN assigned to untagged frames entering this
port.
◆
Port Type - Shows whether or not a port processes the VLAN ID in
ingress frames (Aware or Unaware).
If a port is
not VLAN aware, all frames are assigned to the default VLAN
(as specified by the Port VLAN ID) and tags are not removed.
If a port is VLAN aware, each frame is assigned to the VLAN indicated in
the VLAN tag, and the tag is removed.
◆
Ingress Filtering – If ingress filtering is enabled and the ingress port
is not a member of the classified VLAN of the frame, the frame is
discarded.
◆
Frame Type – Shows whether the port accepts all frames or only
tagged frames. If the port only accepts tagged frames, untagged
frames received on that port are discarded.
◆
Tx Tag – Shows egress filtering frame status, indicating whether
frames are transmitted as tagged or untagged.