Display and control panel AMS 300i
Leuze electronic GmbH + Co. KG
AMS 300
i
43
TNT
35/7-2
4V
8.3
Menu description
8.3.1
The main menus
After voltage has been applied to the laser, device information is displayed for several
seconds. The display then shows the measurement window with all status information.
AMS 300i 120
Leuze
GmbH & Co. KG
SW: V 1.3.0 HW:1
SN: ---------------
Device information - main menu
This menu item contains detailed information on
• Device type
• Manufacturer
• Software and hardware version
• Serial number
No entries can be made via the display.
Network information
Active:
RS232/RS422
Data format:
8,n,1
Baud rate:
---- kbit/s
Network information - main menu
• Explanations of the active interface, data format
and baud rate.
No entries can be made via the display.
IO1 LSR PLB
RS422
IO2 TMP ATT
RS232
ERR
+ 87.000m
Status and measurement data - main menu
• Display of status, warning and error messages.
• Status overview of the switching inputs/outputs
• Bar graph for the received signal level.
• Activated interface.
• Measurement value
No entries can be made via the display.
See "Indicators in the display" on page 39.
Parameter
Parameter handling
RS 422/RS 232
Position value
I/O
Other
Parameter - main menu
• Configuration of the AMS.
See "Parameter menu" on page 44.
Language selection
o Deutsch
o English
o Español
o Français
o Italiano
Language selection - main menu
• Selection of the display language.
See "Language selection menu" on page 48.
Service
Status messages
Diagnosis
Expanded diagnosis
Service - main menu
• Display of status messages.
• Display of diagnostic data.
No entries can be made via the display.
