Installation and mounting
Leuze electronic GmbH + Co. KG
AMS 300
i
21
TNT
35/7-2
4V
5.2.2
Parallel mounting of the AMS 300
i
Definition of the term "parallel spacing"
As shown in Figure 5.4, dimension X describes the "parallel spacing" of the inner edges of
the two laser light spots on the reflector.
Figure 5.4: Minimum parallel spacing X between adjacent AMS 300
i
The diameter of the light spot increases with distance.
Thus, the center-to-center spacing of the two AMS 300
i
devices with respect to one another
can be calculated as a function of the maximum measurement distance.
To define the minimum parallel spacing between two AMS 300
i
, it is necessary to distinguish
between three different arrangements of AMS 300
i
and reflectors.
The AMS 300
i
are mounted stationary and in parallel on one plane.
Both reflectors move independently of one another at different distances to the
AMS 300
i
.
Minimum parallel spacing X of the two laser light spots:
X = 100mm + (max. measurement distance in mm x 0.01)
The AMS 300
i
are mounted stationary and in parallel on one plane.
Both reflectors move in parallel at the same distance to the AMS 300
i
.
Measurement distance up to 120m: minimum parallel spacing X
≥
600mm
Measurement distance up to 200m: minimum parallel spacing X
≥
750mm
Measurement distance up to 300m: minimum parallel spacing X
≥
750mm
X
Reflector 1
Reflector 2
AMS 300
i
40 (H) AMS 300
i
120 (H) AMS 300
i
200 (H) AMS 300
i
300 (H)
Max. measurement
distance
40m
120m
200m
300m
Light spot diameter
≤
40mm
≤
100mm
≤
150mm
≤
225mm
