Leuze electronic CML 720i Ex Operating Instructions Manual Download Page 112

Page: 112 / 141

Connecting to a PC – Sensor Studio

Leuze electronic

CML 720i Ex

112



Connect the IO-Link USB master to the receiver.



CML 700i with CANopen or IO-Link interface:
Connect the IO-Link USB master to the short end of the Y-connection cable (see figure 12.2).
If the Y-connection cable is too short to connect the IO-Link USB master, use a interconnection/syn

chronization cable to extend the cable (to be ordered separately, see table 17.7).

CML 700i receiver

IO-Link USB master

Plug-in power supply unit

Figure 12.2: CML 700i (fieldbus) connection to the IO-Link USB master

12.2.5 Installing the DTM and IODD

Prerequisites:

• The light curtain is connected to the PC via the IO-Link USB master.
• FDT frame and driver for IO-Link USB master are installed on the PC.



Select the IO-Link device DTM (User Interface) installation option and follow the instructions on the

screen.

The Installation Wizard installs the DTM and the IO Device Description (IODD) for the light curtain.

12.3 Starting the

Sensor Studio

configuration software

Prerequisites:

• The light curtain has been mounted (see chapter 6) and connected (see chapter 7) correctly.
• The

Sensor Studio

configuration software is installed on the PC (see chapter 12.2 "Installing

Sensor Studio configuration software and IO-Link USB master").

• The light curtain is connected to the PC via the IO-Link USB master (see chapter 12.2 "Installing

Sensor Studio configuration software and IO-Link USB master").



Start the

Sensor Studio

configuration software by double-clicking the

Sensor Studio

icon (

The Mode selection of the Project Wizard is displayed automatically or under the File menu item.



Select the Device selection without communication connection (offline) configuration mode and click on

[Next].

The Project Wizard displays the device selection list of the configurable devices.

DTM and IODD for all IO-Link devices currently available from Leuze electronic are installed.

Summary of Contents for CML 720i Ex














































































































































Search results

Summary of Contents for CML 720i Ex

Reviews:

Related manuals for CML 720i Ex

Brands by name

Popular brands

Leuze electronic CML 720i Ex, Operating Instructions Manual

Search results

Summary of Contents for CML 720i Ex

Reviews:

Related manuals for CML 720i Ex

Brands by name

Popular brands