Example configurations
Leuze electronic
CML 720i Ex
103
11.5 Example configuration – smoothing
11.5.1 Smoothing configuration (general)
Make the following settings for smoothing.
Example: Smoothing of four interrupted beams
Example: Inverted smoothing of four interrupted beams
11.5.2 Configuration of smoothing via IO-Link interface
Assign the desired value for smoothing.
Example: Smoothing of four interrupted beams
Example: Inverted smoothing of four interrupted beams
11.5.3 Configuration of smoothing via CANopen interface
Assign the desired value for smoothing.
Example: Smoothing of four interrupted beams
Example: Inverted smoothing of four interrupted beams
11.6 Example configuration - Cascading
11.6.1 Configuration of a cascading arrangement (general)
The following figure shows an example for a timing sequence of a cascading arrangement with three light
curtains.
Smoothing settings
Parameter
Smoothing -– less than i interrupted
beams are ignored
:
= 4
Beams are taken into account in the evaluation once
there are four or more interrupted beams
Smoothing settings
Parameter
Inverted smoothing - less than i free
beams are ignored
:
= 4
Beams are taken into account in the evaluation once
there are four or more free beams
General configuration
(group 4)
Index 71, bit offset 8:
= 4
Beams are taken into account in the evaluation once there are four or more
interrupted beams
General configuration
(group 4)
Index 71, bit offset 0:
= 4
Beams are taken into account in the evaluation once there are four or more
free beams
General configuration
(module 3)
Index 2100 sub 03:
= 4
Beams are taken into account in the evaluation once there are four or more
interrupted beams
General configuration
(module 3)
Index 2100 sub 4:
= 4
Beams are taken into account in the evaluation once there are four or more
free beams
