Diagnostics and troubleshooting
Leuze electronic
BPS 348i
84
10.1.2 Diagnostics with webConfig tool
System events are displayed in the webConfig tool via the
DIAGNOSTICS
tab. Noteworthy system events
are recorded in the event log. Depending on their importance, the events are classified as info, warning,
error and critical error. The statistics counters detect the number of all recorded as well as non-acknowl
-
edged messages. With the message filters, the events can be filtered according to their status and their
class.
Figure 10.1:
DIAGNOSTICS
webConfig function
10.2 Operating displays of the LEDs
You can ascertain general causes of errors via the PWR and BUS status LEDs (see table 10.5).
a) n = Module number
b) Only diagnostic or process alarms actually trigger the transmission of an alarm. All other types (preventative mainte
-
nance and status messages) only lead to an entry into the diagnostics buffer and are thus part of the state-based diag
-
nostics.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
