Leuze electronic webConfig tool – Extended configuration
Leuze electronic
BPS 348i
79
Configuration of velocity detection (
DATA PROCESSING
tab,
Velocity
–
Detection
)
• Velocity measurement averaging *
• Error handling procedures *
Configuration of velocity monitoring (
DATA PROCESSING
tab,
Measurement data
–
Velocity
–
Monitoring
)
• Velocity limit value 1-4 *
Configuration of measurement value preparation (
DATA PROCESSING
tab,
Preparation
)
• Unit *
• Count direction *
• Output mode sign *
Configuration of the data output (
DATA PROCESSING
tab,
Output
)
• Position resolution *
• Velocity resolution *
Configuration of the communication data (
COMMUNICATION
tab)
• Parameters of the PROFINET interface
The PROFINET parameters are displayed for viewing purposes only.
• Configuration of the SERVICE USB interface
9.3.2
ALIGNMENT
function
The
ALIGNMENT
function serves to simplify mounting and alignment of the BPS. The laser is to be acti
-
vated via the Start icon so that the function can monitor and directly display the measurement values for
position and velocity and determine the optimum installation location.
In addition, read quality (in %), working distance and the number of labels in the scanning beam can be
displayed. Using this information, it is possible to assess how well the BPS is aligned with the BCB.
NOTICE
ALIGNMENT
function only in the
Service
operating mode!
The BPS can only be aligned using the
ALIGNMENT
function in the
Service
operating mode.
During output of the read results, the BPS is controlled by the webConfig tool.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
