Safety instructions
Teachware 8400 - Application case (2-axis) - DOC 80100005 - DE EN 04.2020
17
EN
1.
Safety instructions
1.1.
Basic safety instructions
•
Only qualified skilled personnel are permitted to work with or on Lenze drive and automa-
tion components. According to IEC 60364 or CENELEC HD 384, these are persons …
… who are familiar with the installation, assembly, commissioning and operation of the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent regulations, directives and
laws applicable at the place of use.
•
The product ...
... must only be used for the purpose for which they are intended.
... must never be operated if noticeably damaged.
... must never be technically altered.
... must never be operated unless completely assembled.
... can be live during and after operation
–
depending on their degree of protection
–
and can al-
so have moving or rotating parts. Surfaces can be hot.
•
When transporting the teachware, bear in mind the higher centre of gravity. Danger of the
teachware falling over.
•
The trolley of the teachware is made for even base. Please use outdoors or on uneven surfaces
in indoor areas always additional suitable resources for the transport.
•
Check and, if necessary, adapt the parameterization of motor data, encoder data, holding brake
data and monitoring settings (I²xt, temperature sensor) before operating the motors.
•
Only operate the teachware if the Makrolon protective cover plates are mounted over the belt
drives and the handwheels and belt pulleys can rotate freely from any foreign objects.
•
Only two 8400 Inverter Drives may be operated simultaneously.
•
The regular technical inspections and replacement/repairment may only be carried out by suita-
bly qualified personnel (e. g. electricians). All technical alterations in the teachware are prohibit-
ed.
•
Observe all instructions in this manual and in the documentation of the assembled inverters and
motors. This is the precondition for safe and trouble-free operation and for obtaining the speci-
fied product features.
Danger!
Disregarding the following basic safety measures and safety information may lead to se-
vere personal injury and damage to property!
