8
Appendix
EDBC250SIO | 2.0
260
Increased EMC immunity levels for safety-related applications:
For the testing of the safety I / O modules, the following three standards for safety-related ap-
plications were taken into account. The interfaces were tested with the highest test levels
from the standards.
•
Product Standard DIN EN 61131-6:2013-10
Programmable controllers. Part 6. Functional safety
•
DIN EN 61326-3-1:2018-04
Electrical equipment for measurement, control and laboratory use - EMC requirements –
Part 3-1: Immunity requirements for safety-related systems and for equipment intended to
perform safety-related functions (functional safety) – General industrial applications
•
Generic Standard DIN EN 61000-6-7:2015-12
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements
for equipment intended to perform functions in a safety-related system (functional safety)
in industrial locations
EMC noise emission to:
•
Generic standard DIN EN 61000-6-4:2011-09
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for
industrial environments
•
Product standard EN 61131-2:2008-04
Programmable logic controllers – Part 2: Equipment requirements and tests
8.3
Regulations and Declarations
8.3.1
Mark of Conformity
The original EC-Declaration of Conformity and the associated documentation can be made
available to the competent authorities. Please contact the Project Management, as necessary.
