52
Information LH100 V3.6
Confirm your selection with 'Enter'.
Use the arrow keys to change the CV
selection.
Every time you change the CV number a PoM read command is sent
to the locomotive decoder. The result of this command can be
displayed with an address display LRC120; see Section ‘1.1.3’ below.
1.1.2 Fast changing of a CV value
If you have selected a CV or entered and confirmed a value with
'Enter' during programming in operational mode, you can increase or
decrease this value simply with '+' or '-'. The new value will be entered
immediately into the decoder.
This is particularly helpful if you, for example, want to adjust the
brightness of the locomotive lighting.
If you have selected a CV and entered a value, you can increase or
decrease this value with '+' or '-'. The new value will be entered
immediately after each change (unlike when programming on the
programming track).
Keep pressing '+' or '-‘ to increase or decrease the value.
1.1.3 Reading CVs with the address display LRC120
It is now possible to read CV values via PoM while in operation.
Requirements:
Use of a RailCom-able locomotive decoder (GOLD series).
The locomotive is located in a track section monitored by the
address display LRC120.
RailCom transmission is activated in the decoder.
