Information LH100 V3.6
39
Press
On the display you see
Explanation
Call up a locomotive in the MU or the
MU address itself
Repeated pressing of the ‘-’ key
shows you all the addresses
assembled in the MU and the MU
address one after the other.
You can select the currently displayed
address for control by pressing
‘Enter’. The functions and direction for
this locomotive are now displayed
This “scrolling” through the MU is especially helpful when you quickly
want to switch to a particular locomotive in the MU to turn functions on
that locomotive on or off.
8.6
Removing a locomotive from a MU consist
You can at any time remove any individual locomotive that is part of a
MU from the MU:
Press
On the display you see
Explanation
Call up the address of the locomotive
you want to remove from the MU
Display shows the most recently
selected menu
You are prompted to remove this
address from the MU.
This display flashes. You now have
the last opportunity to interrupt the
removal with ‘Esc’.
‘Enter’ removes the locomotive from
the MU, and the display will then
again show an ‘L’.
When you remove the last locomotive that is in the MU from the MU,
then the MU itself will be erased.
