18
Information LH100 V3.6
Press 'Esc' again to change to the
next stack slot …
... and to display the locomotive
address placed in this slot.
. . .
Continue until the last stack slot is
displayed.
After the last stack slot, the first slot
will be displayed again …
... with the locomotive address placed
therein.
You can scroll through the stack only in forward direction.
If you want to change the locomotive address in a specific stack place,
simply press the button 'Cl', type in the desired address with the
keypad followed by the 'Enter' button.
You may change the number of the stack slots from 1 to 12. This is
described in the chapter 12.2.8, page 75.
5.1.3 Selecting an address from the command station
stack
The command station stack is a database that contains all the
locomotive addresses that have been used together with the
locomotive's associated data (speed step, function status). With this
function you can select an address to control from any of the
addresses the database:
