50
Information LH100 V3.6
'Enter' starts the programming, and
once it is done, you are returned to
selecting the setting.
Go back to the control of the
locomotive by pressing 'Esc' twice.
1
3
8
11.2.4 Programming a numeric value into a CV — step
by step approach:
In the following example we will change the acceleration delay on a
locomotive with address 3 using PoM:
Before you switch to PoM, you must call up the address of the
locomotive whose settings you want to change!
Press
On the display you see
Explanation
Call up the locomotive whose settings
you want to change using PoM
Display
shows
the
most
recently selected menu
Page with the ‘-’ key until the “CV”
display is shown.
Now enter the number of the CV
whose value you want to change.
The value for the acceleration delay is
stored in CV3
Enter the value that you want to write
into the CV
