26
Information LH100 V3.6
System
Locomotive
decoder
14 or 27 throttle-positions:
14 speed steps
28 or 128 throttle-positions:
28 speed steps
Setting the locomotive decoder to a particular speed step mode is
done in CV29 of the decoder. For details, see the
Digital plus by Lenz
®
"Information for locomotive decoders".
You must make sure that the locomotive decoder also “understands”
the programmed speed step mode.
If unsure, please check in the decoder's operation manual.
5.5
Emergency stop and emergency off
In this section you will learn about:
-
the function of the
key.
-
how to turn off track power
-
changing information during an emergency stop
The 'St' key tells the system to perform an emergency stop. You can
program this key to have two different effects
:
Emergency stop
Emergency off
the locomotives are
stopped, but the track
power remains on
OR
the power on the track is
shut off
alternating with
(flashes)
The factory default is emergency stop, that is all the locomotives are
stopped with track power remaining on. How you program the ‘St’ key is
described in section "".
