Information LH100 V3.6
17
If you make an error, you can use
to erase the last entered
digit.
You continue by pressing each
number in the locomotive's address
After you have entered the complete
locomotive address you confirm the
entry by pressing the 'Enter' key.
The information about functions,
direction and speed step associated
with this address will now be
displayed.
If the display flashes after you call up a locomotive address, then the
locomotive is already being operated by another hand held controller/
If you desire you can still take over control of this locomotive. More
about this in "
Taking over control of a locomotive from another hand
" starting on page (
p.20 ).
5.1.2 Choosing a locomotive from the stack
You may scroll through a stack of up to 12 locomotive addresses with
the 'Esc' key. This is comparable to an index card box with 12 index
cards. You can place any locomotive address in any stack slot.
Ex-works, locomotive addresses 1 to 12 are placed in this stack.
5.1.2.1 Scrolling through the stack
Each time the LH100 is turned on,
stack slot 1 is displayed. Ex-works,
this slot is occupied by locomotive
address 1.
Press 'Esc' to display the next stack
slot.
Release
'Esc'
to
display
the
locomotive address placed in this
slot.
The displayed locomotive can be
controlled immediately!
