Lenovo ThinkSystem SR650 Maintenance Manual Download Page 114

Page: 114 / 244

Step 3. Use a screwdriver to turn the cover lock to the locked position.

After installing the top cover, complete the parts replacement. See “Complete the parts replacement” on
page 203.

RAID super capacitor module replacement

Use this information to remove and install the RAID super capacitor module.

The RAID super capacitor module protects the cache memory on the installed RAID adapter. You can
purchase a RAID super capacitor module from Lenovo.

For a list of supported options, see:

http://www.lenovo.com/us/en/serverproven/

Remove a RAID super capacitor module

Use this information to remove a RAID super capacitor module.

Before removing a RAID super capacitor module:

1. Remove the top cover. See “Remove the top cover” on page 103.

2. Disconnect the cable of the RAID super capacitor module.

To remove a RAID super capacitor module, complete the following steps:

Watch the procedure

. A video of the removal process is available:

• Youtube:

https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_

• Youku:

http://list.youku.com/albumlist/show/id_50483444

Figure 74. RAID super capacitor module removal

Step 1. Gently press the tab on the air baffle as shown.

106

ThinkSystem SR650 Maintenance Manual

Summary of Contents for ThinkSystem SR650





















































































































































































































































Search results

Summary of Contents for ThinkSystem SR650

Reviews:

Related manuals for ThinkSystem SR650

Brands by name

Popular brands

Lenovo ThinkSystem SR650, Maintenance Manual

Search results

Summary of Contents for ThinkSystem SR650

Reviews:

Related manuals for ThinkSystem SR650

Brands by name

Popular brands