Lenovo ThinkSystem SR650, Maintenance Manual

Page: 160 / 244

Notes:
• Depending on the specific type, your PCIe adapter might look different from the illustration in this topic.
• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to the
instructions in this topic.
Before removing a PCIe adapter from the riser assembly:
1. Remove the top cover. See “Remove the top cover” on page 103.
2. Record the cable connections on the PCIe adapter and then disconnect all cables from the PCIe
adapter.
3. Remove the riser assembly and lay it upside down on a flat, clean, and static-protective surface. See
“Remove a riser card” on page 145.
To remove a PCIe adapter from the riser assembly, complete the following steps:
Watch the procedure . A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1. Press the tab to pivot the PCIe adapter retention latch to the open position.
Figure 114. Opening the PCIe adapter retention latch
Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Note: The PCIe adapter might fit tightly into the PCIe slot. If necessary, alternatively move each
side of the PCIe adapter a small and equal amount until it is removed from the slot.
152
ThinkSystem SR650 Maintenance Manual