Lenovo ThinkSystem SR650 V2 Reference Download Page 96

Page: 96 / 212

Information only; no action is required.

•

FQXSPPW2003I: Failure no longer predicted on [PowerSupplyElementName].

This message is for the use case when an implementation has detected a Power Supply failure is no
longer predicted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0089

User Action:

Information only; no action is required.

•

FQXSPPW2005I: [PowerSupplyElementName] has returned to a Normal Input State.

This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099

User Action:

Information only; no action is required.

•

FQXSPPW2006I: [PowerSupplyElementName] has returned to a Normal Input State.

This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099

User Action:

Information only; no action is required.

•

FQXSPPW2007I: [PowerSupplyElementName] Configuration is OK.

This message is for the use case when an implementation when a Power Supply configuration is OK.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0105

User Action:

ThinkSystem SR650 V2 Messages and Codes Reference

Summary of Contents for ThinkSystem SR650 V2





















































































































































































































Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands

Lenovo ThinkSystem SR650 V2, Reference

Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands