Lenovo ThinkSystem SR650 V2 Reference Download Page 192

Page: 192 / 212

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

5. If the problem persists, please contact technical support.

•

FQXPMOS0002K: Failed to read Deployment Manager Signature from USB.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. If the problem persists, reflash BMC firmware.

4. Retry OS deployment.

5. If the problem persists, perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0003K: Failed to copy Windows boot files to target

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0004K: BMC Communication Failed: EMMC2USB Mount Failure.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0005K: BMC communication failed: DRIVER Mount Failure.

Severity: Warning

188

ThinkSystem SR650 V2 Messages and Codes Reference

Summary of Contents for ThinkSystem SR650 V2





















































































































































































































Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands

Lenovo ThinkSystem SR650 V2, Reference

Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands