Lenovo ThinkSystem SR650 V2 Reference Download Page 127

Page: 127 / 212

Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0508

User Action:

Complete the following steps until the problem is solved:

1. Reboot the system.

2. If the problem persists, press F1 or use LXPM to update XCC firmware.

3. Collect service data log from the XCC WebGUI and contact Lenovo Support.

•

FQXSPUN0009I: Sensor [SensorElementName] has asserted.

This message is for the use case when an implementation has detected a Sensor has asserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0508

User Action:

Information only; no action is required.

•

FQXSPUN0017I: Sensor [SensorElementName] has transitioned to normal state.

This message is for the use case when an implementation has detected a Sensor transition to the normal
state.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0518

User Action:

Information only; no action is required.

•

FQXSPUN0018J: Sensor [SensorElementName] has transitioned from normal to non-critical state.

This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.

Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0520

User Action:

Complete the following steps until the problem is solved:

1. If the sensor is "PFR PCH":

Chapter 2

XClarity Controller events

123

Summary of Contents for ThinkSystem SR650 V2





















































































































































































































Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands

Lenovo ThinkSystem SR650 V2, Reference

Search results

Summary of Contents for ThinkSystem SR650 V2

Reviews:

Related manuals for ThinkSystem SR650 V2

Brands by name

Popular brands