Lenovo ThinkStation P500 Hardware Maintenance Manual Download Page 141

Page: 141 / 232

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 198.

Installing or replacing a 3.5-inch storage drive in the optical drive bay

To install or replace a 3.5-inch storage drive in the optical drive bay, do the following:

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 111.

3. Locate the optical drive bay in which you want to install or replace the storage drive. See “Locating

internal drives” on page 38.

4. If your computer has a front-access storage enclosure installed, remove the front-access storage

enclosure from the optical drive bay. See “Installing or replacing a device in the optical drive bay” on
page 114.

5. Press the tab

on the rear of the front-access storage enclosure so that the front cover is opened.

Figure 52. Opening the front cover of the front-access storage enclosure

Chapter 11

Installing or replacing hardware

135

Summary of Contents for ThinkStation P500









































































































































































































































Search results

Summary of Contents for ThinkStation P500

Reviews:

Lenovo ThinkStation P500, Hardware Maintenance Manual, Page: 141 / 232

Search results

Summary of Contents for ThinkStation P500

Reviews: