Lenovo ThinkStation P500 Hardware Maintenance Manual Download Page 116

Page: 116 / 232

3. Follow the instructions on the screen.

– Use the Windows recovery environment by doing one of the following:

– After several consecutive failed boot attempts, the Windows recovery environment might start

automatically. Follow the instructions on the screen to choose the appropriate recovery solution.

– Select the recovery medium you created earlier with the Windows tool as the startup device. See

“Selecting a temporary startup device” on page 68. Then, follow the instructions on the screen
to choose the appropriate recovery solution.

Note:

To create a recovery medium, see “Good maintenance practices” on page 79.

• Use the recovery USB key provided by Lenovo to restore the entire storage drive to the factory-default

settings.

– If your computer comes with the recovery USB key, follow the instructions shipped with the USB key.

– If your computer does not come with the recovery USB key, contact the Lenovo Customer

Support Center to order a recovery USB key. For a list of Lenovo Support phone numbers, go to
http://www.lenovo.com/support/phone. If you cannot find the support telephone number for your
country or region, contact your Lenovo reseller.

110

ThinkStation P500 and P700 Hardware Maintenance Manual

Summary of Contents for ThinkStation P500









































































































































































































































Search results

Summary of Contents for ThinkStation P500

Reviews:

Lenovo ThinkStation P500, Hardware Maintenance Manual, Page: 116 / 232

Search results

Summary of Contents for ThinkStation P500

Reviews: