Lenovo ThinkStation C20, Hardware Maintenance Manual

Page: 53 / 246

Diagnostic Error Code FRU/Action
000-197-XXX BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37.
2. Re-run test.
3. Replace the component that is called out in warning
statement
4. Replace the component under test.
000-198-XXX BIOS test aborted 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37.
2. Flash the system and retest. See “Updating
(flashing) the BIOS” on page 229.
3. Go to “Undetermined problems” on page 67.
000-199-XXX BIOS test failed, cause unknown 1. Go to “Undetermined problems” on page 67.
2. Flash the system and re-test.
3. Replace component under function test.
000-250-XXX BIOS APM failure 1. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
2. System board
000-270-XXX BIOS ACPI failure 1. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
2. System board
001-000-XXX System Test Passed
No action
001-00X-XXX System Error System board
001-01X-XXX System Error System board
001-024-XXX System Addressing test failure System board
001-025-XXX System Checksum Value error 1. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
2. System board
001-026-XXX System FLASH data error 1. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
2. System board
001-027-XXX System Configuration/Setup error 1. Run the Setup Utility program.
2. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
3. System board
001-032-XXX System Device Controller failure System board
001-034-XXX System Device Buffer Allocation failure 1. Reboot the system.
2. Flash the system. See “Updating (flashing) the
BIOS” on page 229.
3. Run memory test.
4. System board
001-035-XXX System Device Reset condition detected System board
001-036-XXX System Register error System board
Chapter 8
.
Symptom-to-FRU Index
47