Lenovo ThinkServer TS200 6522, Hardware Maintenance Manual

Page: 51 / 290

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
SeeChapter 7, “Parts listing, TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530,” on page 201 to
determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Ethernet interface %1 by user %2.
(%1 =
CIM_EthernetPort.EnabledState;
%2 = user ID) Info A user has enabled or
disabled the Ethernet
interface. No action; information only.
Hostname set to %1 by user %2.
(%1 = CIM_DNSProtocolEndpoint.
Hostname;
%2 = user ID) Info A user has modified the host
name of the IMM. No action; information only.
IP address of network interface
modified from %1 to %2 by user
%3.
(%1 = CIM_IPProtocolEndpoint.
IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.
IPAddress;
%3 = user ID) Info A user has modified the IP
address of the IMM. No action; information only.
IP subnet mask of network interface
modified from %1 to %2 by user
%3s.
(%1 = CIM_IPProtocolEndpoint.
SubnetMask;
%2 =
CIM_StaticIPAssignmentSettingData.
SubnetMask;
%3 = user ID) Info A user has modified the IP
subnet mask of the IMM. No action; information only.
IP address of default gateway
modified from %1 to %2 by user
%3s.
(%1 = CIM_IPProtocolEndpoint.
GatewayIPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.
DefaultGatewayAddress;
%3 = user ID) Info A user has modified the
default gateway IP address
of the IMM. No action; information only.
OS Watchdog response %1 by %2.
(%1 = Enabled or Disabled; %2 =
user ID) Info A user has enabled or
disabled an OS Watchdog. No action; information only.
DHCP[%1] failure, no IP address
assigned.
(%1 = IP address,
xxx . xxx . xxx . xxx )
Info A DHCP server has failed to
assign an IP address to the
IMM.
1. Make sure that the network
cable is connected.
2. Make sure that there is a
DHCP server on the network
that can assign an IP address
to the IMM.
Chapter 4. Diagnostics
43