Lenovo ThinkServer TD350, User Manual And Hardware Maintenance Manual

Page: 176 / 226

9. Under the AnyRAID adapter, there is an AnyRAID-adapter tray used to help secure the AnyRAID adapter
in place. If necessary, remove and reinstall the tray by doing the following:
Note: Depending on the model, the AnyRAID-adapter tray that comes with your server might look slightly
different with the following illustrations. However, the removal and installation procedures are the same.
• To remove the AnyRAID-adapter tray, press the release tab 1 . Then, grasp the tray and carefully pull
it out of the chassis.
Figure 130. Removing the AnyRAID-adapter tray
• To reinstall the AnyRAID-adapter tray, locate the mounting area on one side of the chassis. Insert the
tab into the hole 1 and align the two pins on the tray with the two gaps 2 in the mounting area.
Then, pivot the AnyRAID-adapter tray downward until it snaps into position.
Figure 131. Installing the AnyRAID-adapter tray
10. Touch the static-protective package that contains the new AnyRAID adapter to any unpainted surface
on the outside of the server. Then, take the new AnyRAID adapter out of the package.
162
ThinkServer TD350 User Guide and Hardware Maintenance Manual