Lenovo ThinkServer RD340, Operating System Installation Manual

Page: 27 / 70

6. In the YaST Control Center window, click Network Devices ➙ Network card .
7. In the Network Setup Method window, select User Controlled with NetworkManager and click Next .
8. Choose an Ethernet card as you need and click Edit .
9. In the Network Address Setup window, select Static Address Setup and configure the settings as
you need. Then, click Next .
10. Configure other Ethernet cards if needed. Click Finish to complete the Ethernet card configuration.
Installing the driver for an onboard graphics card
This topic provides instructions on how to install the driver for an onboard graphics card.
To install the driver for an onboard graphics card, do the following:
1. Copy the onboard graphics card driver from the ThinkServer EasyStartup DVD to your local drive.
Double-click the EXE file to unzip it to a folder. Copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /xorg69
rpm –ivh xorg69-0.96-0.x86.rpm
Note: In the command lines, xorg69 represents the name of the driver package file and
xorg69-0.96-0.x86.rpm represents the driver name. Use the corresponding file name on your server.
4. Restart your server.
Installing the driver for an HBA card
This topic provides instructions on how to install the driver for an HBA card.
To install the driver for an HBA card, do the following:
1. Copy the HBA card driver from the ThinkServer EasyStartup DVD to your local drive. Double-click the
EXE file to unzip it to a folder. Copy the folder to your USB storage device and connect the USB
storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
tar zxvf elx-lpfc-dd-rhel6-8.3.7.18-1-1.tar.gz
cd elx-lpfc-dd-rhel6-8.3.7.18-1-1
chmod u+x *
./elx_lpfc_install.sh
Notes:
• If the file extension is not .tar.gz, skip the second command.
• In the command lines, elx-lpfc-dd-rhel6-8.3.7.18-1-1 represents the name of the driver package file
and elx_lpfc_install.sh represents the driver name. Use the corresponding file name on your server.
4. Restart your server.
Chapter 2
.
Installing an operating system in legacy mode
21