Lenovo ThinkServer RD340, Operating System Installation Manual

Page: 22 / 70

4. Select ASPEED Display Controller (AST2300) from the Please Select Driver drop-down list box.
5. Click Install .
6. In the Message from webpage window, click OK to restart your server.
Installing the driver for an Ethernet card
To install the driver for an Ethernet card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. In the “End User License Agreement” window, click Accept . The installation window is displayed.
3. Click Driver Installation . Then, select your server model from the Server Model drop-down list box,
and the operating system from the Operating System drop-down list box.
4. Select Intel
®
I350 Gigabit Network Connection from the Please Select Driver drop-down list box.
5. Click Install .
6. In the Message from webpage window, click OK to restart your server.
Installing the driver for an HBA card
This topic provides instructions on how to install the driver for an HBA card.
To install the driver for an HBA card, do the following:
1. Download the driver for an HBA card from the Lenovo Web site to your server. The most up-to-date
device drivers for various server models are always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder. Copy the folder to your USB storage device and connect
the USB storage device to your server.
3. Log in to the operating system.
4. In the Device Manager window, right-click the HBA card which you need to install drivers for.
5. Click Update Driver Software
➙
Browse my computer for driver software .
6. Go to the folder where the driver is stored, click OK , and then click Next .
Note: If prompted, select Always trust software from Qlogic Corporation and click Install .
7. When the installation completes, click Close .
Installing the driver for a CNA card
The driver for a CNA card is installed during the operating system installation.
Installing the driver for Intel Management Engine Interface
To install the driver for Intel Management Engine Interface, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. In the “End User License Agreement” window, click Accept . The installation window is displayed.
3. Click Driver Installation . Then, select your server model from the Server Model drop-down list box,
and the operating system from the Operating System drop-down list box.
16
ThinkServer RD340 and RD440 Operating System Installation Guide