Lenovo ThinkServer RD340, Operating System Installation Manual

Page: 26 / 70

12. Click Finish .
13. In the Installation Settings window, click Software to select your desired software programs, and
then click OK .
Note: If you are prompted to verify the changes, click Accept .
14. Click Install to install the software programs that you have selected.
15. When the Confirm Installation window is displayed, click Install . When the installation process is
completed, the server restarts automatically.
16. The setup process continues after the server restarts. Set your root user password. Then, select
Next and press Enter.
Note: The password must contain at least six characters and consist of upper case letters, lower
case letters, and numbers.
17. Set your host name and domain name. Then, select Next and press Enter.
18. Configure your network in the Network Configuration window. Then, select Next and press Enter.
Note: If the Test Internet Connection window is displayed, configure the settings as you need. Then,
select Next and press Enter.
19. In the Installation Settings window, configure the settings as you need. Select Next and press Enter.
20. In the “User Authentication Method” window, configure the settings as you need. Select Next and
press Enter.
21. In the LDAP Client Configuration window, configure the settings as you need. Select Next and press
Enter.
22. In the New LDAP User window, configure the settings as you need. Select Next and press Enter.
23. In the Release Notes window, select Next and then press Enter.
24. In the Hardware Configuration window, select Next and then press Enter.
25. In the Installation Completed window, click Finish .
26. Follow the instructions on the screen to log in to the operating system.
Installing the driver for an Ethernet card
This topic provides instructions on how to install the driver for an Ethernet card.
To install the driver for an Ethernet card, do the following:
1. Copy the Ethernet card driver from the ThinkServer EasyStartup DVD to your local drive. Double-click
the EXE file to unzip it to a folder. Copy the folder to your USB storage device and connect the USB
storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
tar zxvf e1000e-x.x.x.x.tar.gz
cd e1000e -x.x.x.x /src
make install
Note: In the command lines, e1000e -x.x.x.x represents the name of the driver file. Use the
corresponding file name on your server.
4. Restart your server and click Computer on the lower left corner.
5. Click YaST .
20
ThinkServer RD340 and RD440 Operating System Installation Guide