manualshive.com logo in svg

Lenovo ThinkServer RD330, Software User'S Manual, Page: 85 / 401

Share
Download
Lenovo ThinkServer RD330 Software User'S Manual Download Page 85

Page 85

MegaRAID SAS Software User Guide

Chapter 4: WebBIOS Configuration Utility

 | 

Creating a Storage Configuration

4.5.3.5

Using Manual 

Configuration: RAID 00

A RAID 00 drive group is a spanned drive group that creates a striped set from a series 
of RAID 0 drive groups. It breaks up data into smaller blocks and then stripes the blocks 
of data to RAID 00 drive groups. The size of each block is determined by the stripe size 
parameter, which is 64 KB.

RAID 00 does not provide any data redundancy but does offer excellent performance. 
RAID 00 is ideal for applications that require high bandwidth but do not require fault 
tolerance. 

When you select 

Manual Configuration

 and click 

Next

, the Drive Group Definition 

screen appears.

You use the Drive Group Definition screen to select drives to create drive groups.

1. Hold <Ctrl> while you select ready drives in the Drives panel on the left.

2. Click 

Add To Array

 to move the drives to a proposed drive group configuration in 

the Drive Groups panel on the right.

3. If you need to undo the changes, click 

Reclaim

.

4. Click 

Accept DG

 to create a RAID 0 drive group.

An icon for the next drive group appears in the right panel.

5. Hold <Ctrl> while you select more ready drives in the Drives panel to create a 

second RAID 0 drive group.

6. Click 

Add To Array

 to move the drives to a second drive group configuration in the 

Drive Groups panel, as shown in 

Figure 44

.

7. If you need to undo the changes, click 

Reclaim

.

NOTE:

RAID 00 supports a maximum of eight spans, with a maximum of 32 drives per 

span. (Other factors, such as the type of controller, can limit the number of drives.)

8. Choose whether to use drive encryption.

9. Click 

Accept DG

 to create a RAID 0 drive group.

Summary of Contents for ThinkServer RD330


















































































































































































































































































































































































































Reviews:

No comments