Lenovo ThinkServer RD330 Software User'S Manual Download Page 289

Page: 289 / 401

Page 289

MegaRAID SAS Software User Guide

Chapter 8: Configuration

Changing a Virtual Drive Configuration

6. Review the configuration information.

You can click

Back

if you need to change any selections.

7. Click

Finish

to accept the changes.

A confirmation message appears. The message states that this operation cannot be
aborted and asks whether you want to continue.

8. Click

Yes

to accept and complete the addition of the drives to the drive group.

8.7.3

Removing a Drive from a

Configuration

CAUTION:

Be sure to back up the data on the virtual drive before you remove a drive

from it.

Follow these steps to remove a drive from a RAID 1, RAID 5, or RAID 6 configuration.

NOTE:

This option is not available for RAID 0 configurations.

1. Click the

Logical

tab in the left panel of the MegaRAID Storage Manager main

menu screen.

2. Click a drive icon in the left panel of the screen.

3. Select

Go To> Physical Drive>Make Drive Offline

on the menu bar, or right-click

the drive and select

Make Drive Offline

from the menu.

A confirmation message appears. The message states that this operation cannot be
aborted and asks whether you want to continue.

4. Click

Yes

to accept and complete the removal of the drive from the drive group.

8.7.4

Replacing a Drive

CAUTION:

Be sure to back up the data on the virtual drive before you replace a drive.

Follow these steps to add a replacement drive and copy the data from the drive that
was removed to the replacement drive.

1. Click the

Logical

tab in the left panel of the MegaRAID Storage Manager window.

2. Select a drive in the left panel of the window.

3. Select

Go To> Physical Drive>Replace Physical Drive

on the menu bar, or

right-click the virtual drive icon to access the Modify Drive Group Wizard.

The screen with the replacement drive appears, as shown in

Figure 174

Summary of Contents for ThinkServer RD330


















































































































































































































































































































































































































Search results

Summary of Contents for ThinkServer RD330

Reviews:

Lenovo ThinkServer RD330, Software User'S Manual, Page: 289 / 401

Search results

Summary of Contents for ThinkServer RD330

Reviews: