Lenovo ThinkServer RD330 Software User'S Manual Download Page 280

Page: 280 / 401

Page 280

MegaRAID SAS Software User Guide

Chapter 8: Configuration

Changing Power Settings

Figure 159: Manage Power Save Settings screen

3. Select the

Unconfigured Drives

check box to let the controller enable the

unconfigured drives to enter the Power-Save mode.

4. Select the

Hot spare Drives

check box to let the controller enable the Hot spare

drives to enter the Power-Save mode.

5. Select the

Configured Drives

check box to let the controller enable the Configured

drives to enter the Power-Save mode.

6. Select the Drive standby time (Alt+d) using the drop-down selector from the

Drive

standby time

field.

NOTE:

The

Drive Standby time

drop-down selector will be enabled only if any of the

check boxes above are checked. The drive standby time can be 30 mins, 1hr, 1.30 hrs,
2hrs through 24 hrs.

7. Select the Power-Save mode using the drop-down selector from the

Select Power-

Save mode

field. The mode can be

Auto

Max

Max without cache

NOTE:

The

Select Power-Save mode

drop-down selector is enabled only if the

Configured drives

check box

is selected. The

Max without cache

mode option depends

on the firmware settings.

8. Click

. The Power-Save settings are saved.

After you click

, the following dialog box appears.

Summary of Contents for ThinkServer RD330


















































































































































































































































































































































































































Search results

Summary of Contents for ThinkServer RD330

Reviews:

Related manuals for ThinkServer RD330

Brands by name

Popular brands

Lenovo ThinkServer RD330, Software User'S Manual

Search results

Summary of Contents for ThinkServer RD330

Reviews:

Related manuals for ThinkServer RD330

Brands by name

Popular brands