Lenovo RackSwitch G8264CS, Installation Manual

Page: 47 / 96

© Copyright Lenovo 2015 Chapter 3: Installing G8264CS Hardware and Options
47
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
(Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/-
0.1 Nm (50 inch-pounds).
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws
(Item 3), washers (Item 5), and clip nuts (Item 4). Torque the screws to
approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
7. If installing the 1U air-duct option, see the instruction on page 48 .
8. Connect all external cables in accordance with the “Cabling Guidelines” on
page 38 .
9. Initialize the switch. See Chapter 5, “Initializing the G8264CS ,” on page 73 .
10. If the switch is a replacement unit, set Vital Product Data (see “Configuring Vital
Product Data” on page 71 ).
5
3
4
7
3
5
4