Lenovo RackSwitch G8264CS, Installation Manual

Page: 35 / 96

© Copyright Lenovo 2015 Chapter 3: Installing G8264CS Hardware and Options
35
Required Tools
You need the following tools or equipment to install the G8264CS:
•
Standard flat-blade screwdriver
• #2 Phillips screwdriver
• Electrostatic discharge wrist strap
Package Contents
The basic G8264CS package contains the following items:
•
One RackSwitch G8264CS unit with front-to-rear or rear-to-front airflow
• One two-post mounting kit for standard 19” equipment racks:
– Two mounting brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
• One console cable kit that includes:
– One Mini-USB to RJ-45 serial cable
– One Category 5 patch cable
– One DB9 to RJ-45 adapter
• Two AC power cords
• One
Documentation
CD, which includes the
Systems Information
document
• One
Environmental Notices
CD
• One
Important Notices
document
• One
Warranty Information
document
For a list of compatible switch components and options (such as rack-mounting kits,
modules, cords, and cables), see the Lenovo Networking Catalog .
Environmental Requirements
This section describes the basic environmental requirements for the G8264CS.
Make sure the location where you install the switch meets the following
requirements:
•
Install the switch unit in a dry, clean, well-ventilated area.
• Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.
• Make sure that an adequate grounded power supply is within reach of the switch
unit.
• Make sure that twisted-pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.