Lenovo RackSwitch G8264CS Installation Manual Download Page 11

Page: 11 / 96

Contents

Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 3

Read the Safety Information   . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   . 3
Safety Statements  . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   . 5
Other Important Safety Notices  .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   . 9

Chapter 1. The RackSwitch G8264CS . . . . . . . . . . . . . . . . 15

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G8264CS Documentation . . . . . . . . . . . . . . . . . . . . . 16

About this

Installation Guide. . . . . . . . . . . . . . . . . . . 16

Notices and Statements in this Document   .   . .   .   .   . .   .   .   . .   .   .   16
The Documentation CD . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   17
Related Documentation . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   17

Chapter 2. Switch Components . . . . . . . . . . . . . . . . . . 19

Switch Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Management Panel. . . . . . . . . . . . . . . . . . . . . . . . 20

Mini-USB Serial Console Port  .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   20
RJ-45 Management Port  . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   21
Reset Button. . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   21
System Status LEDs    . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   22
USB Port  .   . . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   22

Switching Ports . . . . . . . . . . . . . . . . . . . . . . . . . 23

SFP+ Ports   . . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   23
QSFP+ Ports   . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   24
Omni Ports   . . .   .   . . .   .   .   . .   .   .   . .   .   .   . .   .   .   . .   .   .   26

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . 28

Chapter 3. Installing G8264CS Hardware and Options . . . . . . . . . 33

Before Installing the G8264CS . . . . . . . . . . . . . . . . . . . 34

Installing the G8264CS in a Rack . . . . . . . . . . . . . . . . . . 39

Installing the G8264CS in a Standard Equipment Rack .   .   .   .   .   .   .   .   39
Installing the G8264CS in a Lenovo System x or Power Rack    .   .   .   .   .   41
Installing the G8264CS in a Lenovo iDataPlex Rack   .   .   .   .   .   .   .   .   .   45

Installing the Air-Duct Option . . . . . . . . . . . . . . . . . . . . 48
Installing Port Transceivers . . . . . . . . . . . . . . . . . . . . 52

Summary of Contents for RackSwitch G8264CS

































































































Search results

Summary of Contents for RackSwitch G8264CS

Reviews:

Related manuals for RackSwitch G8264CS

Brands by name

Popular brands

Lenovo RackSwitch G8264CS, Installation Manual

Search results

Summary of Contents for RackSwitch G8264CS

Reviews:

Related manuals for RackSwitch G8264CS

Brands by name

Popular brands