Lenovo 7Y51 Messages And Codes Reference Download Page 144

Page: 144 / 176

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4081I: Host Power-On password has been cleared.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4082I: Host Admin password has been changed.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4083I: Host Admin password has been cleared.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4084I: Host boot order has been changed.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4085I: Host WOL boot order has been changed.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPW0001L: CMOS has been cleared.

Severity: Warning

User Action:

Complete the following steps:

1. If the CMOS clear was user initiated this event can be safely ignored and no further action is required.

2. If the system was recently installed, moved, or serviced, make sure the battery is properly seated.

3. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this

error.

4. If the problem persists, collect Service Data logs.

5. Contact Lenovo Support.

•

FQXSFSM0002N: Boot Permission denied by Management Module: System Halted.

Severity: Warning

User Action:

Complete the following steps:

140

ThinkSystem SR250 Messages and Codes Reference

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands