Lenovo 7Y51 Messages And Codes Reference Download Page 85

Page: 85 / 176

•

FQXSPPP4048I: Attempting to AC power cycle server [arg1] by user [arg2].

AC power cycle server

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0227

User Action:

Information only; no action is required

•

FQXSPPR0001I: [ManagedElementName] detected as absent.

This message is for the use case when an implementation has detected a Managed Element is Absent.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0392

User Action:

The device is absent.

•

FQXSPPR2000I: [ManagedElementName] detected as present.

This message is for the use case when an implementation has detected a Managed Element is now
Present.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0390

User Action:

The device is detected

•

FQXSPPU0000I: [ProcessorElementName] in slot [SlotElementName] has been added.

This message is for the use case when an implementation has detected a Processor has been Added.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0034

User Action:

Information only; no action is required.

•

FQXSPPU0001N: An Over-Temperature Condition has been detected on [ProcessorElementName].

Chapter 2

XClarity Controller events

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands