Lenovo 7Y51 Messages And Codes Reference Download Page 47

Page: 47 / 176

CIM Prefix: IMM CIM ID: 0198

User Action:

Information only; no action is required

•

FQXSPFC4005I: UEFI deployment boot mode has been disabled.

UEFI deployment boot mode has been disabled

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0199

User Action:

Information only; no action is required

•

FQXSPFW0002N: The System [ComputerSystemElementName] encountered a firmware hang.

This message is for the use case when an implementation has detected a System Firmware Hang.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: System - Boot failure
SNMP Trap ID: 25
CIM Prefix: PLAT CIM ID: 0186

User Action:

Complete the following steps until the problem is solved:

1. Unplug and plug in power to restart the system.

2. If the problem still exist, please updgrade the firmware to the level you have or newer then restart.

3. If the problem still exist, please contact serivce for further support.

•

FQXSPFW2000I: The System [ComputerSystemElementName] has detected a POST Error

deassertion.

This message is for the use case when an implementation has detected that Post Error has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0185

User Action:

Information only; no action is required.

•

FQXSPFW2001I: The System [ComputerSystemElementName] has detected a POST Error

deassertion.

This message is for the use case when an implementation has detected that Post Error has deasserted.

Severity: Info
Serviceable: No

Chapter 2

XClarity Controller events

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands