Lenovo 7Y51 Messages And Codes Reference Download Page 167

Page: 167 / 176

1. Follow prompts to select a newer version of the update package and retry the update.

2. Restart BMC via BMC setting under uEFI setup on LXPM left panel.

3. Perform AC reset if the error still exist.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

4. Use other Lenovo tools to perform the update (ex. XClarity Administrator, XClarity Controller, or the

OneCLI utility).

5. If the error still occurs, contact service to support.

•

FQXPMUP0207M: The update package is invalid. Failed to update the firmware.

Severity: Error

User Action:

1. Ensure the update package is undamaged and retry the update.

2. Ensure proper connection to USB/network drive and retry the update.

3. Restart BMC via BMC setting under uEFI setup on LXPM left panel.

4. Perform AC reset.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

5. Use other Lenovo tools to perform the update (ex. XClarity Administrator, XClarity Controller, or the

OneCLI utility).

6. If the error still occurs, contact service to support.

•

FQXPMUP0208M: Failed to execute reboot BMC command

Severity: Error

User Action:

1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.

2. Perform AC reset if the error still exist.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

3. If the error still occurs, contact service to support.

•

FQXPMVD0001H: Failed to get VPD data.

Severity: Warning

User Action:

1. Press "Back" button and press "Update VPD..." button again.

2. Perform AC reset if step 1 failed.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

3. If the error still occurs, contact service to support.

•

FQXPMVD0002H: Failed to update the VPD data.

Severity: Warning

Chapter 4

XClarity Provisioning Manager events

163

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands