Lenovo 7Y51 Messages And Codes Reference Download Page 133

Page: 133 / 176

User Action:

Complete the following steps:

1. No action required - system will reboot at the end of POST.

2. Reflash the adapter firmware.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFDD0004M: DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.

Severity: Fatal

User Action:

Complete the following steps:

1. Reboot the system.

2. Reflash the adapter firmware.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFDD0005M: DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.

Severity: Warning

User Action:

Complete the following steps:

1. Reboot the system to reconnect the controller.

2. Reflash the adapter firmware.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFDD0006M: DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.

Severity: Warning

User Action:

Complete the following steps:

1. Reboot the system.

2. Reflash the adapter firmware.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFDD0007G: Security Key Lifecycle Manager (SKLM) IPMI Error.

Severity: Warning

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to

this error.

2. A/C cycle the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

Chapter 3

UEFI events

129

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands