Lenovo 7Y51 Messages And Codes Reference Download Page 119

Page: 119 / 176

Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0224

User Action:

Information only; no action is required

•

FQXSPUN0009G: Sensor [SensorElementName] has asserted.

This message is for the use case when an implementation has detected a Sensor has asserted.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0508

User Action:

Complete the following steps:

1. Reboot the system.

2. If the problem still exist, please press F1 or use LXPM to do XCC FW update.

•

FQXSPUN0009I: Sensor [SensorElementName] has asserted.

This message is for the use case when an implementation has detected a Sensor has asserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0508

User Action:

Information only; no action is required.

•

FQXSPUN0017I: Sensor [SensorElementName] has transitioned to normal state.

This message is for the use case when an implementation has detected a Sensor transition to the normal
state.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0518

User Action:

Information only; no action is required.

•

FQXSPUN0018J: Sensor [SensorElementName] has transitioned from normal to non-critical state.

This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.

Chapter 2

XClarity Controller events

115

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands