Lenovo 7Y51 Messages And Codes Reference Download Page 25

Page: 25 / 176

Table 2. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSPUN0026G

Device [LogicalDeviceElementName] has been added.

Warning

FQXSPUN0056G

Sensor [SensorElementName] has asserted.

Warning

FQXSPBR4003I

Platform Watchdog Timer expired for [arg1].

Error

FQXSPBR4007I

Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to complete.

Error

FQXSPBR4008I

Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to start.

Error

FQXSPCA0002M

Numeric sensor [NumericSensorElementName] going low (lower
critical) has asserted.

Error

FQXSPCA0009M

Numeric sensor [NumericSensorElementName] going high (upper
critical) has asserted.

Error

FQXSPCA0011N

Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has asserted.

Error

FQXSPCA0017M

Sensor [SensorElementName] has transitioned to critical from a less
severe state.

Error

FQXSPCA0019N

Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.

Error

FQXSPCR0001N

Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.

Error

FQXSPFW0002N

The System [ComputerSystemElementName] encountered a firmware
hang.

Error

FQXSPIO0001L

The connector [PhysicalConnectorElementName] has encountered a
configuration error.

Error

FQXSPIO0003N

A diagnostic interrupt has occurred on system
[ComputerSystemElementName].

Error

FQXSPIO0004L

A bus timeout has occurred on bus [SensorElementName].

Error

FQXSPIO0006N

A software NMI has occurred on system
[ComputerSystemElementName].

Error

FQXSPIO0011N

An Uncorrectable Error has occurred on [SensorElementName].

Error

FQXSPMA0005N

Subsystem [MemoryElementName] has insufficient memory for
operation.

Error

FQXSPMA0012M

An Over-Temperature Condition has been detected on the
[PhysicalMemoryElementName] on Subsystem
[MemoryElementName].

Error

FQXSPMA0013N

The System [ComputerSystemElementName] has detected no
memory in the system.

Error

FQXSPMA0015L

Redundancy Lost for [RedundancySetElementName] has asserted.

Error

FQXSPOS4002I

Watchdog [arg1] Failed to Capture Screen.

Error

FQXSPOS4003I

Platform Watchdog Timer expired for [arg1].

Error

FQXSPOS4010I

OS Crash Video Capture Failed.

Error

Chapter 2

XClarity Controller events

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands