Lenovo 7Y51 Messages And Codes Reference Download Page 96

Page: 96 / 176

•

FQXSPPW2006I: [PowerSupplyElementName] has returned to a Normal Input State.

This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099

User Action:

Information only; no action is required

•

FQXSPPW2007I: [PowerSupplyElementName] Configuration is OK.

This message is for the use case when an implementation when a Power Supply configuration is OK.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0105

User Action:

Information only; no action is required.

•

FQXSPPW2008I: [PowerSupplyElementName] has been turned on.

This message is for the use case when an implementation has detected a Power Unit that has been
Enabled.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Power On
SNMP Trap ID: 24
CIM Prefix: PLAT CIM ID: 0107

User Action:

Information only; no action is required.

•

FQXSPPW2031I: Numeric sensor [NumericSensorElementName] going low (lower non-critical) has

deasserted.

This message is for the use case when an implementation has detected a Lower Non-critical sensor going
low has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Voltage
SNMP Trap ID: 13
CIM Prefix: PLAT CIM ID: 0477

User Action:

Information only; no action is required

ThinkSystem SR250 Messages and Codes Reference

Summary of Contents for 7Y51

















































































































































































Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands

Lenovo 7Y51, Messages And Codes Reference

Search results

Summary of Contents for 7Y51

Reviews:

Related manuals for 7Y51

Brands by name

Popular brands