Figure 93. PHM components
1
Heat sink
9
Clips to secure processor in carrier
2
Heat sink triangular mark
10
Carrier triangular mark
3
Processor identification label
11
Processor ejector handle
4
Nut and wire bail retainer
12
Processor heat spreader
5
Torx T30 nut
13
Thermal grease
6
Anti-tilt wire bail
14
Processor contacts
7
Processor carrier
15
Processor triangular mark
8
Clips to secure carrier to heat sink
Watch the procedure
. A video of the installation and removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• Youku:
https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Make preparations for this task.
a. Remove the top cover. See “Remove the top cover” on page 214.
b. Remove the following components depending on the location of the processor that is to be
removed:
• If the processor is located on the processor and memory expansion tray,
do not
remove the
expansion tray. Only remove the air baffle from the expansion tray.
180
ThinkSystem SR850 V2 Maintenance Manual
Summary of Contents for 7D31
