13
Charging Your PMP
Your PMP has an integrated rechargeable battery.
•
Plug one end of the supplied power adapter into the PMP’s DC 5V Power
Jack and plug the other end into a 100-240V wall outlet.
The battery should be charged fully (minimum 4 hours) before its
initial use to ensure optimum lifetime performance.
The battery used in this device may present a fire or chemical
burn hazard if mistreated. Do not disassemble, incinerate, or heat
the battery.
Do not connect the power plug to a power outlet other than that
which is indicated here or on the label as this may result in the risk
of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may cause
electric shock.
Use only AC adapters of the type specified here. Failure to do so
may case a fire or damage the player.
Turning Your PMP On/Off
•
To turn the PMP on, press and hold
until you see the “Lenco” Screen.
•
To turn the PMP off, press and hold
until the PMP turns off.
Hold Switch (Key Lock)
The Hold feature disables your PMP’s controls to prevent accidental key presses
when it is in your pocket or bag.
•
To lock the PMP, slide the Hold switch to the left. A Lock icon will appear
on-screen.
•
To unlock the PMP, slide the Hold switch to the right.
GEttInG startED
Summary of Contents for XEMIO-3530
Page 52: ......
